Nortel Meridian 1 Option 11C Manual page 54

Page 54 of 100 DTI/PRI Maintenance
553-3011-310 Standard 13.00
Table 12
D-channel commands (LD 96) (Part 1 of 2)
Command
DIS DCH N
DIS MSGI N
DIS MSGO N
DIS AUTO N
ENL AUTO N
ENL DCH N
ENL MSGI N
ENL MSGO N
EST DCH N
PLOG DCH N
RLS DCH N
SDCH
RST DCH N
STAT DCH (N)
STAT MSGI (N)
STAT MSGO (N)
January 2002
Action
Disable DCHI port N
Disable monitoring of incoming D-channel
messages on link N Monitor remains active
until disabled.
Disable monitoring of outgoing D-channel
messages on link N Monitor remains active
until disabled.
Disable autorecovery of the D-channel.
Hardware may still respond to recovery
initiated from the far end.
Enable autorecovery of the D-channel.
Software will periodically command hardware
to attempt to establish the layer 2 link.
Enable DCHI port N
Enable monitoring of incoming D-channel
messages on link N. Use only under light
traffic.
Enable monitoring of outgoing D-channel
messages on link N. Use only under light
traffic.
Establish D-channel N
Print D-channel statistics log N
Release D-channel N
Release a D-channel and switch D-channels
Reset D-channel N
Print D-channel status (link status)
Print incoming message monitor status
Print outgoing message monitor status