Nortel Meridian 1 Option 11C Manual page 34

Page 34 of 100 PRI Implementation
LD 14 – Define service channels and PRI trunks.
Prompt Response
REQ NEW
CHG
TYPE TIE
TN c ch
RTMB 0-127 1-510
...
LD 73 – Define system timers and clock controller parameters.
Prompt Response
REQ CHG
TYPE PRI
FEAT SYTI
CC0 1-9
PREF CCO 1-9
SREF CC0 1-9
CC1 11-19
PREF CC1 11-19
553-3011-310 Standard 13.00
Description
Add new data
Change existing data
Note: When assigning several members at once use the multiple
create command NEW XX.
TIE trunk only, allowed between MSL-1.
Enter the PRI trunk card (c) and channel number (ch).
c = 1-9 for main cabinet, 11-19 for IP expansion cabinet1, 21-29
for IP expansion cabinet 2, 31-39 for IP expansion cabinet 3,
and 41-49 for IP expansion cabinet 4.
ch = 1-30
Route number and member number
Description
Change data
1.5 Mb PRI
System timers
Card slot number for Clock Controller 0.
Card slot number of PRI card containing the prImary clock
reference for the Main cabinet (this is the system clock.)
Card slot number of PRI card containing the secondary clock
reference for the Main cabinet (this is the system clock.)
Card slot number for Clock Controller 1.
Card slot number of PRI card containing the prImary clock
reference for IP Expansion cabinet 1.
January 2002