Test Strip; Speaking Function - Fora MD Operations & Procedures Manual

Test Strip

2
Absorbent Hole
1
Touch a drop of blood here, blood will be
automatically drawn in.
2
Test Strip Handle
Hold this part to insert the test strip into the
slot.
3
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
4 Confirmation Window
This is where you confirm if enough blood
has been applied to the absorbent hole in the
strip.
ATTENTION:
The front side of test strip should face
up when inserting the test strip.
Test results might be wrong if the contact
bar is not fully inserted into the test slot.
NOTE:
The FORA MD meter should only be used with FORA MD
Test Strips. Using other test strips with this meter can produce
inaccurate results.
10
1
4
3

Speaking Function

FORA MD "speaks" aloud with voice instructions
to guide you through the process of blood glucose
testing. The following table tells you when and
what the meter "says".
WHEN
does the meter talk?
Using the meter
1. Thank you for using this product.
Insert test strip when
the meter is ready to
test. (symbol appears
2. The Code Number is 10.
on display)
3. Please apply blood into the strip.
When the test is Your blood glucose is (number)
completed. (result (milligrams per deciliter/millimoles
appears on display) per liter).
When the test result The blood glucose is out of range
is < 20 mg/dL. unable to measure.
When the test result The blood glucose is out of range
is > 600 mg/dL. unable to measure.
Your blood glucose is (number)
Recall the Stored
(milligrams per deciliter/millimoles
Test Results.
per liter).
WHAT
does the meter say?
Please relax during
measurement.