Test Strip - Fora Diamind VOICE Owner's Manual

Test Strip

Absorbent Hole
Apply a drop of blood
here. The blood will be
automatically absorbed.
Test Strip Handle
Hold this part to
insert the test strip
into the slot.
NOTE:
The FORA Diamond VOICE meter should only be used with FORA Diamond
VOICE Test Strips. Using other test strips with this meter can produce
inaccurate results.
8
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not
fully inserted into the test slot.
Confirmation Window
This is where you confirm
if enough blood has been
applied to the absorbent
hole in the strip.
Contact Bars
Insert this end of the test
strip into the meter. Push
it in firmly until it will go
no further.