Test Strip - Fora MD Owner's Manual

Test Strip

Absorbent Hole
Touch to a drop of
blood here, blood will
be automatically
drawn in.
Test Strip Handle
Hold this part to
insert the test strip
into the slot.
The FORA MD meter should only be used with FORA MD Test Strips. Using
other test strips with this meter can produce inaccurate results.
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
Confirmation Window
Confirm if enough blood
has been applied to the
absorbent hole of the
strip.
Contact Bars
Insert this end of the test
strip into the test strip
slot.
NOTE
13