Meter Memory; Reviewing Test Results; Reviewing Blood Glucose Day Average Results - Fora MD Operations & Procedures Manual

METER MEMORY

The meter stores the 1000 most recent blood
glucose test results along with respective dates
and times in its memory. To enter the meter
memory, start with the meter switched off.

Reviewing Test Results

1. Press and release M
" " will appear on the display. Press M
again, and the first reading you see is the last
blood glucose result along with date, time and the
measurement mode.
(300 mg/dL)
2. Press M to recall the test results stored in the
meter each time you press. After the last test
results, press M again and the meter will be
turned off.
(200 mg/dL)
3. Exit the meter memory. After the last test
result, press M again and the meter will be turned
off.
18
Reviewing Blood Glucose Day
Average Results
1. Press and release M
When " " appears on the display, keep pressing
Main button for 3 seconds until the flashing
" " appears. Release Main button and
then your 7-day average result measured in
general mode will appear on the display.
2. Press M to review 14-, 21-, 28-, 60- and 90-
day average results stored in each measuring
mode in the order of Gen, AC, then PC.
3. Exit the meter memory. Keep pressing Main
button and the meter will turn off after displaying
the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing M for 5
seconds or leave it without any action for 3 minutes. The meter
will switch off automatically.
• Control solution results are NOT included in the day average.
• If using the meter for the first time, "---" displays when you
recall the test results or review the average result. It indicates
that there is no test result in the memory.