Advertisement
Hardware
Installation
Determine swivel hook installation location.
Mark through the holes in hook base plate onto mounting
surface.
Always check that each installation location is clear
of wires, fuel tanks and lines, brake lines and other
important vehicle functionality items prior to
drilling and installing any product.
At each marked location, drill a hole using 17/64" drill bit.
Using two 1/4" x 1/2" flanged hex head bolts and two 1/4"
flanged lock nuts, securely install locking swivel hook.
Repeat installation instructions for each hook.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 40053
MARK &
DRILL
GO BACK AND ENSURE ALL
HARDWARE IS TIGHTENED.
INSTALLATION IS COMPLETE.
MARK &
DRILL
Page 2
Advertisement
