Technical Specifications - Infinite Peripherals Linea Pro 7 Plus User Manual

LINEA PRO 7 PLUS USER MANUAL

Technical Specifications

Electrical
1D/2D Barcode Scanner
1D: EAN/UPC, GS1 Databar (limited expanded & omni-directional),
RSS, Code 39, Code128, UCC/EAN 128, ISBN, ISBT, Interleaved/Matrix/
Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI,
Plessey, Telepen, postal codes (Australian Post, BPO, Canada Post, Dutch
Post, Japan Post, PostNet, Sweden Post)
2D: Data Matrix, PDF417, Micro PDF 417,
Codablock, Maxicode, QR, Aztec, GS1 composite codes,
Direct Part Marking Reading multicodes and barcodes
on mobile phone screens available.
2D Barcode Reader
• 2D Intermec EA30/ED40* CMOS Imager 752 x 480 pixels
• 2D Newland EM3396 CMOS Imager 752 x 480 pixels, laser
aimer
Battery Capacity
• Rechargeable Li-ion Battery 3.7V /2400 mAh
• Precise battery management by Fuel Gauge microcontroller for
remaining battery capacity
Power Supply
• DC 5V through USB Type-C
• DC 5V through charging station
• DC 5V through dual charging station
Indicators
Audio via electromagnetic buzzer
(Optional) Contactless Card Reader
• ISO/IEC 14443 Type-A/MIFARE:
* MIFARE MINI
* MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
* MIFARE ULTRALIGHT, ULTRALIGHT-C
* MIFARE PLUS 2K/4K
* MIFARE DESFire card
• Supports most contactless card cards/tags:
* ISO/IEC 14443 Type - B
* ISO 15693
Mechanical
Compatibility
iPhone 7 Plus
iPhone 8 Plus
Dimensions
93.5mm x 36.5mm x 186.5mm (3.68" x 1.44" x 7.34")
Weight
250g (8.82oz.) without iOS device
Connectivity
• Apple 9 pin connector
• Pass-through sync through USB Type-C
• Bluetooth 2.0 Class 2
• SPP - Serial Port Profile
Buttons
• Two scan buttons
• Reset device button
Port
USB Type-C for iOS device charge and sync
Processor
32-bit ARM Cortex - M3 MCU
Environment
Operating Temperature
-10° to +40°C / 14°F to +104°F
Storage Temperature
-20° to +50°C / -4°F to +122°F
Relative Humidity
5% to 90%
General Certifications
CE
Note:
Use only UL approved USB adapters with a minimum of 5V/2.1A
Charging current for the iOS device is selected from the application:
• 500mA (default)
• 100mA
5