Replacing The Media When The End Of The Roll Is Reached; Replacing The Media After A Media Jam; Setting The Media Remaining Length - Oki IP-6620 User Manual

Replacing the media when the end of the roll is reached

When there is no more media on the roll, the printer detects it automatically and displays a message.
However, note that with some media types, the printer may not be able to automatically detect the end of the roll. If
printing continues when there is no more media, the printer may get dirty or malfunction. Be sure to check visually
the remaining length of media.
1
LIFT THE LEVER AND
LOAD THE MEDIA
2
Replace the media following the Procedure to remove the roll media and the Procedure
to load the roll media.

Replacing the media after a media jam

Refer to How to clear a media jam on

Setting the media remaining length

1
PRINTER READY
01: PAPER/1626mm
2
MENU
2 INFORMATION
3
MENU
2
SET REMAINING MEDIA
4
>SET REMAINING MEDIA
2 g
01:000 050m
>SET REMAINING MEDIA
2 g
01:050 050m
A message is displayed on the LCD screen.
page 233.
Press the MENU button.
Press the Down button to select SET
REMAINING MEDIA.
Press the OK button.
Set the remaining media length and press the
OK button.
Loading the media
61