Oki IP-6620 User Manual page 96

15
>>>>BIDIR ADJUST 1
2
*M_L:±XX
*: Registration mark (A registration mark * is displayed if
the media preset is registered)
XXX. XX: Current adjustment value
YYY. YY: Adjustment value after change (setting range -15
16
>>>>BIDIR ADJUST 1
2 *M_L:±XX
17
>>>1: DRA,FAST PR,PRO
2 *M_L:±XX
96
Adjustment
g
±YY
to +15)
, , ,
g +02
,
,
Press the Right and Left buttons to select the
digit, and press the Up and Down buttons to
select a value for bidirectional adjustment.
Correspondence between the bidirectional adjustment
values and the print modes.
Bidirectional
adjustment value
BIDIR ADJUST 1 Draft*, fast production, and
production
BIDIR ADJUST 2 Standard and quality
BIDIR ADJUST 3 High quality
BIDIR ADJUST 4 Max quality
* Only supported by the CIS model.
Press the OK button to set the bidirectional
adjustment value, or press the CANCEL
button to exit BIDIR ADJUST 1.
Set the bidirectional adjustment values of
the other side and the other print heads
following the same procedure.
When bidirectional adjustment values have
been set for both sides of all print heads, the
adjustment procedure is complete.
Print mode