In loose mode
Loose mode is recommended for vinyl and solvent printing coated paper media.
Before printing, pull the guide bar toward you to lower it from the standby position to the usage position.
Note
Taking up the media in loose mode with the guide bar in the standby position may cause the media to shift.
Do not put your hand on the guide bar. Doing so may damage the guide bar or you may be injured by the guide bar falling.
In tension mode
Tension mode is recommended for tarpaulin media.
Leave the guide bar in the standby position.
Note
Taking up the media in tension mode with the guide bar in the usage position may cause the media to shift.
64
Loading the media