Oki IP-6620 User Manual page 100

4
1ST WIPING OPERATION
PLEASE WAIT
5
OPEN COVERS, CLEAN
CAPS AND CHECK WIPER
6
GOOD
The procedure
is nished.
7
100
Maintenance
1:00
Carriage stops moving.
BAD
Continue the procedure
from step 2.
After the wiping of the print heads finishes, the carriage
moves to the maintenance area.
The printer issues a warning beep.
š When the carriage moves, the printer issues a
warning beep.
To disable the warning beep, see the
202.
After the carriage has moved to the
maintenance area, open the front cover, and
then the capping unit cover.
If you notice dirt or damage on the wiper
blades, execute REPLACE BLADE to replace
them after the start maintenance has
finished.
Soak the cleaning swab (thick) in the cap
cleaning liquid.
TIP
š To keep the cap cleaning liquid clean, do not soak
the cleaning swab (thick) in the cap cleaning liquid
bottle again after you have cleaned the caps with it.
š You can clean the entire capping unit with one
cleaning swab (thick) soaked once in cap cleaning
liquid.
page