3
4
5
The replacement procedure is complete.
- When the procedure is completed normally, the printer returns to the online or offline state.
- An error message is displayed if the procedure is not completed normally.
In such as case, start the procedure again from step 1.
- Printing continues as long as ink remains in the reservoir, even when ink is being supplied.
(2)
(1)
Install the ink bottle to supply ink to the
reservoir.
Note
Pay attention to the color of the ink to supply when
installing the bottle.
When supplying several ink bottles, always wait until
the ink in the bottle has completely poured into the
reservoir before removing the bottle.
Leave the bottle on the reservoir after you have finished
supplying all the ink.
Close the LCIS unit drawer.
Advanced operations
223