Locking Procedure - EGR RollTrac Owner's Manual

Manual locking / unlocking using key:
1. Ensure cover is fully closed.
2. Open the rubber cap covering the lock and using the provided key turn RIGHT to lock and LEFT
to unlock the cover.
3. Check lock engagement by opening the tailgate, if lock does not engage recheck cover installation.
Electric locking / unlocking using key:
1. Ensure cover is fully closed.
2. Lock or unlock the cover by using button on the key remote.
3. Check lock engagement by opening the tailgate, if lock does not engage recheck cover installation
NOTE: If vehicle is locked, buttons are deactivated and cover will not open/close.
Lock latches will not activate untill cover is in fully closed position.
Ensure to return tailgate to fully closed position prior to lock/unlock.
Emergency Opening:
1. In case of entrapment inside a locked vehicle tub fitted with EGR RollTrac, release the motor clutch by
pushing in the Clutch Disengagement Lever (on the RH side of the cover).
2. Turn the emergency release handle located on the centre of the hand rail assembly and retract the
slats manually.
1.
RT0001 Date: 08/04/20

Locking Procedure

UNLOCK
2.
PUSH
Issue: 5 Page: 7 of 12
LOCK
TURN HANDLE