Installation Checklist; Key Identification Code - EGR RollTrac Owner's Manual

Installation Checklist.

Dealer Name & Code:
Order Date:
Required By:
Vehicle Damage Check:
Installation Checklist:
1
RollTrac sealing evenly to tray/tub
2
Position EGR RollTrac correctly relative to tailgate rail and cab
3
Position EGR RollTrac on tub squarely and centrally
Clamps are square and tight, torqued as specified in your EGR RollTrac installation
4
instruction, side bolts and pads fitted.
5
Check that the clutch release lever functions correctly (must be done prior to calibration)
Water drainage pipes connected and in place (front and rear)
6
7 Test that lock latches lock and unlock with tailgate down and also when tailgate is up
8
Check cover moves from fully open to fully closed smoothly and quietly
9
Check anti pinch operates correctly
10 Check that emergency handle on hand rail opens lock latches correctly
Ensure all accessories are fitted as per manufacturers recommendations
11
12
Check LED lights operate
Comments:
Fitted By:

Key Identification Code.

RT0001 Date: 08/04/20
INSTALLATION CHECKLIST
Stock No:
Detail:
KEY IDENTIFICATION CODE
Please write the key identification code in the boxes above,
and retain this copy with the vehicle service history.
Replacement keys can be purchased from your local dealer.
Issue: 5 Page: 12 of 12
Car Model and Rego:
Vin No:
EGR RollTrac Serial Number:
EGR RollTrac - KEY ID CODE:
Checked By: