16.7 OTHTRS
Show advanced setup
Restore default settings
Touch screen calibration
17 SOFTWARE UPGRADE
To upgrade the version software use only microSDHC memory card.
Enter:
General Settings → Software Upgrade and upgrade the software: first in the A module, then
in regulator's control panel.
Registry changes:
Operation alarms when the parameter Reserve boiler set to zero.
Available options:
YES - shows hidden parameters, which edition is not
recommended.
NO - hides hidden parameters.
Restoring service settings will also restore the settings from the main
menu (the user).
Setting the proper reaction of the program to the desired position on
the touch panel screen.
To upgrade the software, disconnect power
supply
ecoTOUCH control panel from the regulator
housing. Insert memory card into indicated
slot.
software stored in the *.pfc format (two files:
one with software for control panel, and the
other one with software for module "A" of the
regulator). Upload new software directly to
the memory card. Do not nest data in sub-
directory. Re-install
regulator housing and connect power supply.
42
Note: Software may be upgraded
by authorised personnel only. All
electric
shock
measures must be applied!
of
the
regulator
Memory
card
should
the control
preventive
and
remove
contain
new
panel in