Assembling The Support Frame; Image - Barco DP4K-L Series Installation Manual

1. DP4K-L series accessory kit
6. "Installing the plastic catch basin", page 12.
7. "Installing the castor wheels", page 13. (optional)
1.3

Assembling the support frame

What has to be done?
The hoses support frame has to be mounted on the bracket. The mounting orientation depends on the
direction, upwards or downwards, the hoses because the support frame is not symmetric. The left side
(L) of the support frame is shorter than the right side (R).
L
L < R

Image 1-7

U Support frame mounted on the bracket in case hoses goes upwards.
D Support frame mounted on the bracket in case hoses goes downwards.
Necessary tools
3 mm Allen wrench.
How to assemble the support frame for the hoses?
1. Remove the four screws from the bracket.
2. Place the support frame on the bracket and fasten with the four screws which were removed in step 1.
Caution: Ensure to orient the support frame correctly onto the bracket. In case the hoses goes down-
wards use position D as illustrated. In case the hoses goes upwards use position U as illus-
trated.
D
180°
Image 1-8
6
R
U
L
U
L
R5905882 DP4K-L ACCESSORY KIT 06/09/2017
D
R
L
R
R