Starting/Stopping The Blower - Yardworks 060-3890-8 Instruction Manual

8
model no. 060-3890-8 | contact us: 1.866.523.5218
APPLICATIONS
You may use this product for the purposes listed below:
• Clearing leaves and other yard debris from your lawn.
• Keeping decks, patios, garages and driveways free from leaves, pine needles and other
debris.

STARTING/STOPPING THE BLOWER

1. Cord retainer
2. Loop
3. Plug
4. Extension cord
• Attach the outlet end of an extension cord to the plug on the rear of the blower.
NOTE: Use only an approved outdoor extension cord as described previously in this
manual.
• Route the extension cord through the side of the loop located on the rear of the blower
housing and place underneath the cord retainer.
• To start the blower, move the power switch to the ON position.
To stop the blower, move the power switch to the OFF position.
•
2
3
1
4