Specifications; Operating Instructions - HE-VA Tip-Roller XL Series Operating Instructions Manual

5-section hydraulic wheel-mounted field roller with free movability in all sections. Used for rolling
of stones and packing of the top soil. The roller is available with a working width of 12,3 m or 15,3
m and with five different ring types: Cambridge-, Cam-, Star-, 2D wave-, and Crosskill rings.
Technical Specifications
Work Width
Total Width in workposition
Length
Width in transportposition
Hight in transportposition
Pressure on pintle eye in transport
position (% of total weight)
Wheel assembly, standard
Tyre pressure
Oil pressure
Hydraulic outlets
Quick-couplings, standard
Hydraulic oil: system is filled with
Attachment
On delivery, the roller is in transport position. When the roller is attached, check that the towing
hook height is 400-500 mm. Reverse the tractor, and put in and secure the draw bolt.
IMPORTANT: Check that the male quick couplings of the hydraulic hoses, mounted by the
factory, fits the female end of the tractor.
Tip-Roller XL 12,3 – 15,3m
UK

Specifications

4 double-acting (tipping – folding – support leg – SAT
Plus 1 DA. per each additional equipment (Spring Board –

Operating Instructions

12,3 m
12,65 m
8,6 m
3,0 m
ca. 40 %
710/40Rx22,5
3,8 bar / 55 psi
min. 150 bar
system)
tine)
Sterling type E 402
Hydro Texaco HD32
6
04-09-2019
15,3 m
15,65 m
8,6 m
3,0 m
ca. 40 %
710/40Rx22,5