Advertisement
STEP 6
1. Please remove the four sets of screws (E-2) from the pedal arm (E-1,E-9).
2. Assemble the front cover L/R (Q-4, Q-5) to the pedal arm (E-1,E-9) by adding screws (E-2) on
each side.
3. Please remove the four sets of screws (D-5) from the lower handlebar (D-1,D-6).
4. Assemble the front/rear cover L/R (Q-13,Q-14) to the lower handlebar (D-1,D-6) by adding
four sets of screws (D-5) and screws (P-17).
5. Remove the pre-installed Screws (B-4) on the handlebar post first, and then assemble the
Bottle holder (Q-2) using Screw (B-4).
(6)
P-17 M3x25L
STEP 7
1. Remove the pre-installed screws (A-1) on the console (A) first.
2. Connect the upper console cables (B-2) and the two pulse wires (B-10) to the console (A),then
attach the console (A) to the computer bracket with the enclosed screws (A-1).
3. Please remove the four sets of screws (B-4) from the handlebar post (B-1).
4. Attach the rear cover (Q-10) by adding two screws (B-4) and screws (P-18) to the handlebar
post (B-1).
5. Attach the front cover (Q-9) by adding screws (B-4) to the handlebar post (B-1).
x4
(7)
x2
P-8 M4x20
Advertisement
