8271 Ethernet LAN Switch Modules
Feature Codes 5212 and 5312
Number of ports:
Supported daughter cards:
Connectors:
Supported cable types:
Maximum cable lengths
Further Information
70
IBM 8265: Planning and Site Preparation Guide
Refer to the following documents for additional information:
•
8271 LAN Switch Module Planning and Installation Guide,
GA27-4162.
•
100BASE-TX and 100BASE-FX Universal Feature Cards: Planning and
Installation Guide, GA27-4096.
•
4-Port 10BASE-T and 3-Port 10BASE-FL Universal Feature Cards: Planning and
Installation Guide, GA27-4120.
•
ATM 155Mbps Multimode Fiber Universal Feature Card
Planning and Installation Guide, GA27-4156.
12 base, plus additional ports depending on the I/O
cards installed.
•
10BASE-T (4-port)
•
10BASE-FL (3-port)
•
100BASE-TX (1-port)
•
100BASE-FX (1-port)
•
ATM/Ethernet (1-port).
•
RJ-45 (shielded) base
•
RJ-45 (shielded) for 10BASE-T and 100BASE-TX
cards
•
ST for 10BASE-FL and 100BASE-FX cards
•
SC for ATM/Ethernet card
•
UTP 3 (100 ohm), FTP (120 ohm), or STP (150
ohm) for base and 10BASE-T card ports
•
UTP 5 (100 ohm) for 100BASE-TX card ports
•
62.5/125 micron multimode fiber for 10BASE-FL,
100BASE-FX, and ATM/Ethernet card ports
•
100 m for UTP3, UTP5, FTP, and STP
•
2 km for multimode fiber