IBM Nways 8265 Product Description
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Switch
  5. 8265 Nways ATM Switch
  6. Product description

IBM Nways 8265 Product Description

Atm switch
Hide thumbs Also See for Nways 8265:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
IBM
8265 Nways ATM Switch
Product Description
GA33-0449-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nways 8265 and is the answer not in the manual?

Questions and answers

Related Manuals for IBM Nways 8265

Summary of Contents for IBM Nways 8265

  • Page 1 8265 Nways ATM Switch Product Description GA33-0449-02...
  • Page 3 8265 Nways ATM Switch Product Description GA33-0449-02...
  • Page 4 • IBM Internal Use: LGERCF at LGEPROFS • Internet: rcf_lagaude@vnet.ibm.com When you send information to IBM, you grant IBM a non-exclusive right to use or distribute the information in any way it believes appropriate without incurring any obligation to you.

  • Page 5: Table Of Contents

    Control Plane ........... . 19 © Copyright IBM Corp. 1994, 1998...
  • Page 6 8265 Modules and Daughter Cards ........69 IBM 8265: Product Description...
  • Page 7 Appendix D. Supported 8260 ATM Modules ......71 Appendix E. Notices ..........73 Product Page/Warranties .
  • Page 8 IBM 8265: Product Description...

  • Page 9: Figures

    Figures Figure 1. Front View of the IBM 8265 ..... 1 Figure 2. Rear View of the IBM 8265 ..... 3 Figure 3.
  • Page 10 IBM 8265: Product Description...

  • Page 11: Tables

    Minimum FPGA Levels Required for 8260 ATM Modules ..72 Table 17. Related Publications......79 © Copyright IBM Corp. 1994, 1998...
  • Page 12 IBM 8265: Product Description...

  • Page 13: About This Book

    This book assumes that you are familiar with ATM networks and network management. Where to Find More Information Refer to the “Bibliography” on page 79 for a list of IBM manuals that contain related information and publications for the 8265 switch. Information is also available via the Internet, at URL: http://www.networking.ibm.com...
  • Page 14 IBM 8265: Product Description...

  • Page 15: Chapter 1. Introduction

    Chapter 1. Introduction Part 0 8265 Switch Overview The IBM 8265 Nways ATM Switch is a modular chassis that provides high flexibility in designing and configuring ATM networks. The IBM 8265 is fully compatible with existing IBM 8260- and IBM 8285-based ATM networks, and allows the installation of 8265 and 8260 ATM media modules.

  • Page 16: Switch Characteristics

    Switch Characteristics The IBM 8265 Nways ATM Switch has the following characteristics: Internetworking Technology 8265 internetworking solutions provide connectivity between internal networks, and connectivity from internal networks to ATM and WAN backbones. The internetworking capabilities of the 8265 system combine with the flexibility of port-switching media modules to deliver bandwidth on demand for existing LANs.

  • Page 17: Support For 8260 Atm Media Modules

    Figure 2 shows the rear view of the 8265. Units Ventilation Grille Figure 2. Rear View of the IBM 8265 Power Management The Control Point and Switch (CPSW) module works with the Controller module to protect network integrity using power management. The CPSW module manages...

  • Page 18: Atm Backplane

    After installing the module, you must configure it for operation by entering a series of commands from the CPSW module console. You cannot install a media module in slot 12 if a CPSW module is installed in slots 11-12. IBM 8265: Product Description...

  • Page 19: Understanding 8265 Management

    Understanding 8265 Management The management of the 8265 is achieved in four areas: Chassis Management • Network Management • Traffic Management • Code Management. • Chassis Management The 8265’s controller module provides management of the power and cooling subsystems. The 8265 has one controller module as standard, and a second controller module can be installed as a backup in case of failure.

  • Page 20: Traffic Management

    5697-B12 ® UNIX Version 2 Contact your IBM representative for information on the latest versions of these, and other, network management programs for the 8265. Traffic Management The 8265 advanced traffic management functions are distributed on each 8265 module. The key functions are: Priority queues per Quality of Service: •...

  • Page 21: Managing Code Updates

    Traffic shaping per Virtual Path: • Traffic shaping regulates traffic to a lower rate than the line speed, and is active for incoming and outgoing traffic. The control at the Virtual Path (VP) level means that the 8265 can have different shaping values for different VPs that are active on the same port.

  • Page 22: Security

    Access to the 8265 ATM network is provided for all types of ATM applications. When an ATM station connects to the 8265 switch, it must register its address through ILMI. The network administrator can specify which ATM address are allowed access. IBM 8265: Product Description...

  • Page 23: Chapter 2. Features And Components

    Power supplies: either • – 415 W AC (Feature Code 8027), or – 295 W -48 Vdc (Feature Code 8026) Power supply cables • Documentation (on CD-ROM). • For additional optional components, refer to page 14. © Copyright IBM Corp. 1994, 1998...

  • Page 24: Controller Module

    CPSW module. As a result, the 8265 ATM subsystem uses a distributed control system which offers the following advantages: Each ATM module benefits from the fault-tolerant design of the IBM 8265 chassis. • Continued ATM network operation is ensured in case of a failure at a single point •...

  • Page 25: Media Modules And Daughter Cards

    415 W AC (Feature Code 8027) • 295 W DC (-48 V, Feature Code 8026) • Existing power supplies from an IBM 8260 (295 W and 415 W AC, or • 295 W -48V DC). The power supplies provide two main output voltages: + 12 volts, used by the 8265 components at power on time •...

  • Page 26: Table 2. Power Capacity At +5.2 Volts (Ac Power Supplies)

    (295 Watt) cannot backup a higher output power supply (415 Watt). See the IBM 8260 Nways Multiprotocol Switching Hub Product Description , GA33-0415 for power capacities when a mixture of 415 W and 295 W AC power supplies are used.

  • Page 27: Table 4. Ac Power Cord Plugs For Each Country

    2.8 m (9 ft) in length unless specified otherwise. Use this table to ensure that you receive the correct power cord with your 8265. This list does not include all countries. If your country is not listed, consult your IBM representative. Table 4. AC Power Cord Plugs for Each Country...

  • Page 28: Optional Components

    All documentation related to the 8265 is available on a CD-ROM. This CD is automatically shipped with the PCMCIA card containing the basic Control Point and Switch microcode (Feature Code 6505). For a list of publications on this CD, refer to the Bibliography on page 79. IBM 8265: Product Description...

  • Page 29: Figure 4. 8265 With Components Installed

    Figure 4 shows the 8265 with components. ATM/Token-Ring Control Point and LAN Switch Module Switch Module MSS Server 4-port 155 Mbps Module Module 4-port 155Mbps Module Video Distribution 1-port 622Mbps Module Module Wan 2 Module Controller Module Power Supply Bay Grille Figure 4.
  • Page 30 IBM 8265: Product Description...

  • Page 31: Chapter 3. Modules

    Active LED Standby LED Temperature LED LED Test Button Reset Button 8000-RCTL Figure 5. Controller Module Faceplate For more information, refer to the IBM 8265 Nways ATM Switch Installation Guide , SA33-0441. Part 1 © Copyright IBM Corp. 1994, 1998...

  • Page 32: Control Point And Switch Module

    Figure 6 shows the faceplate of the CPSW module. CPU Stop LED System Status LCD Reset LED Display Control Button ATM Reset Button RS-232 Console Port RJ-45 Ethernet Port Figure 6. CPSW Module Faceplate IBM 8265: Product Description...

  • Page 33: Cpsw Module Functions

    SNMP agent allows you to: • Configure ATM modules • Monitor ATM subnetworks. Each IBM 8265 Control Point provides functions on three planes; the Control plane, User plane, and Management plane. Control Plane • Both Switched and Permanent Virtual Circuits (SVCs and PVCs) •...

  • Page 34: User Plane (Hardware)

    – Allows traffic of different QOS to be split over different virtual paths sharing the same physical ATM interface. This is a key function when connecting to WAN ATM carrier services or to a WAN ATM switch, such as the IBM Nways 2220 Broadband Switch.

  • Page 35: Management Plane

    Management Plane • Access Control – Unauthorized users are prevented from accessing the network. • Network Management – Chassis Monitoring This feature allows the network administrator to monitor the 8265 environment parameters (power supplies, inventory, temperature) via the Control Point and Switch module. Environment parameters can be accessed either via the console or via Telnet.

  • Page 36: Snmp

    ATM MIB defined in the V3.0 UNI Specification of the ATM Forum. The AToMIB is defined by the IETF and by the IBM extensions. It can be driven by SNMP managers, such as IBM NetView for AIX. The IBM ATM management application, Nways Campus Manager - ATM, can be used by a LAN administrator to fine-tune the system.

  • Page 37: Media Modules

    Media Modules Media modules belong to the Nways family and can be used in the 8265 switch to: • Send and receive data from an ATM subsystem in another 8265 switch • Attach high capacity workstations and servers that function in ATM mode. The media modules interface to the 8265 switch by means of the Control Point and Switch (CPSW) module.

  • Page 38: Table 6. Available Media Modules

    1. Slot 12 cannot be used if a CPSW module is installed in slot 11. 2. Equivalent 8260 modules may also be used. 3. Slot 7 cannot be used if a CPSW module is installed in slot 9. IBM 8265: Product Description...

  • Page 39: Table 7. Media Module Daughter Cards

    Daughter Cards Table 7 lists the daughter cards available for 8265 media modules. Table 7. Media Module Daughter Cards No. of Type Feature Code Connector Type(s) Ports For 155Mbps Module (Feature Code 6543): Multimode Fiber 6580 Singlemode Fiber 6581 UTP/STP 6582 RJ-45 For WAN 2 Module (Feature Code 5602):...

  • Page 40: Table 8. Media Module Universal Feature Cards

    Feature Code Connector Type(s) Ports For 8271 ATM/Ethernet Modules: ATM/Ethernet MMF 6988 100BASE-Tx 6995 RJ-45 100BASE-Fx 7000 10BASE-FL 8603 10BASE-T 9195 RJ-45 For 8272 ATM/Token-Ring Modules: ATM/Token-Ring MMF (enhanced) 2762 Fiber (enhanced) 5087 UTP/STP (enhanced) 5092 RJ-45 IBM 8265: Product Description...

  • Page 41: Atm Carrier Module

    ATM Carrier Module The ATM Carrier module (Feature Code 5102) is part of the IBM ATM Kit Development Program that provides companies and developers with a simple and inexpensive way to add their ATM technology to the 8265. This program allows you to build ATM functions and modules for the 8265, and develop new ATM applications.

  • Page 42: 4-Port 155Mbps Modules

    Up to 14 modules can be used in the 8265 switch. The modules may be installed or removed from the switch (hot-pluggable) without disturbing data traffic on other ATM modules. For further information, refer to page 52. IBM 8265: Product Description...

  • Page 43: Figure 8. 4-Port 155Mbps Module Faceplate

    Figure 8 shows the faceplate of the multimode fiber module. Module Status LED Ports LEDs Reset LED Module Reset Button Ports A4-MB155 Figure 8. 4-port 155Mbps Module Faceplate Chapter 3. Modules...

  • Page 44: 622Mbps Modules

    The modules may be installed or removed from the switch (hot-pluggable) without disturbing data traffic on other ATM modules. For further information, refer to page 55. Figure 9 on page 31 shows the faceplate of the 622Mbps module. IBM 8265: Product Description...

  • Page 45: Figure 9. 622Mbps Module Faceplate

    Module Status LED Module Reset LED Reset Button Ports LEDs Port Figure 9. 622Mbps Module Faceplate Chapter 3. Modules...

  • Page 46: 4-Port 100Mbps Module

    • Up to four modules can be used in the 8265 (slots 1, 3, 5, and 7). For further information, refer to page 56. Figure 10 on page 33 shows the faceplate of the module. IBM 8265: Product Description...

  • Page 47: Figure 10. 4-Port 100Mbps Module Faceplate

    Activity LED Status LED Reset LED Module Reset button (resets module) PORT 1 PORT 2 Ports PORT 3 PORT 4 Wrong Slot LED A4-SC100 Figure 10. 4-port 100Mbps Module Faceplate Chapter 3. Modules...

  • Page 48: 12-Port 25Mbps Module

    • Up to four modules can be used in the 8265 (slots 1, 3, 5, and 7). For further information, refer to page 56. Figure 11 on page 35 shows the faceplate of the module. IBM 8265: Product Description...

  • Page 49: Figure 11. 12-Port 25Mbps Module Faceplate

    Port Status LEDs Module Reset LED Module Reset Button ATM Ports Wrong Slot LED A12-TP25 Figure 11. 12-Port 25Mbps Module Faceplate Chapter 3. Modules...

  • Page 50: Wan 2 Module

    ATM data cells are transferred via UTOPIA • Daughter cards access the ATM functions via UTOPIA Up to four modules can be used in the 8265 (slots 1, 3, 5, and 7). For further information, refer to page 57. IBM 8265: Product Description...

  • Page 51: Figure 12. Wan 2 Module Faceplate

    Figure 12 shows the faceplate of the WAN 2 module. Figure 12. WAN 2 Module Faceplate Chapter 3. Modules...

  • Page 52: Multiprotocol Switched Services (Mss) Server Module

    • Virtual LAN support: logical groups of end stations • Enhanced availability of LAN emulation: an IBM extension to LAN emulation that supports multiple LAN Emulation Servers for backup purposes. • Enhanced LAN emulation broadcast management: an IBM extension to the BUS that reduces the broadcast traffic to improve network performance.

  • Page 53: Figure 13. Mss Server Module Faceplate

    For further information, refer to page 60 and the Bibliography, on page 79, for related publications. Figure 13 shows the faceplate of the MSS Server module. PCMCIA Modem Slot (top) PCMCIA Modem Slot (bottom) PCMCIA LEDs Module Status Port Activity Port Status Reset RS 232...

  • Page 54: Video Distribution Module

    MPEG-2 video streams. A video source, such as the IBM Media Streamer or the Video Access Node (IBM 8300), can connect to one or more of the module’s ports and transmit MPEG-2 video streams through the ATM network and into the module.

  • Page 55: Figure 14. Video Distribution Module Faceplate

    Port 3 Hub LEDs Ports and Status LEDs Reset Button (A = Audio B = Video) and LED Port 4 Ports and Status LEDs (A = Audio B = Video) Port 5 Ports and Status LEDs (A = Audio B = Video) RS-232 Port Port 6 EIA 232...

  • Page 56: Atm/Ethernet Lan Switch Modules (8271)

    Management - either via the service port or from an SNMP management station. Up to four modules can be used in the 8265 (slots 1, 3, 5, and 7). Slot 7 cannot be used for a 3-slot module when a CPSW module is installed in slot 9. IBM 8265: Product Description...

  • Page 57: Figure 15. 8271 Ethernet Lan Switching Module Faceplates

    For more information, refer to page 61 and the Bibliography, on page 79, for related publications. Figure 15 shows the faceplates of the 2- and 3-slot 8271 modules. Reset LED Module Status LED Port Activity LED Port Status LED Fault LED OK LED System Request Buttom...

  • Page 58: Atm/Token-Ring Lan Switch Modules (8272)

    Statistics - the 8272 modules keeps statistics on a per-port, per-station, or entire module basis. • Token Probe - a port can be defined to monitor other ports. • Management - either via the service port or from an SNMP management station. IBM 8265: Product Description...

  • Page 59: Figure 16. 8272 Token-Ring Lan Switching Module Faceplates

    Up to four modules can be used in the 8265 (slots 1, 3, 5, and 7). Slot 7 cannot be used for a 3-slot module when a CPSW module is installed in slot 9. For more information, refer to page 65 and the Bibliography, on page 79. Figure 16 shows the faceplates of the 2- and 3-slot 8272 modules.

  • Page 60: Receiving Code Updates

    RS-232 or RJ-45 Ethernet Port Modem Workstation Workstation ATM network administrators perform out-of-band operations. Figure 17. Microcode Upgrade Procedures For more information on upgrading ATM microcode, refer to the IBM 8265 Nways ATM Switch User’s Guide, SA33-0456. IBM 8265: Product Description...

  • Page 61: Appendix A. Technical Specifications

    Storage temperature: 1 to 60°C (33.8 to 140°F) Wet bulb: 29°C (84.2°F) Shipping relative humidity: 5 to 100% Storage relative humidity: 5 to 80% Acoustics A weighted sound power level not exceeding 6.6 Bels. © Copyright IBM Corp. 1994, 1998...

  • Page 62: Power And Electrical Wiring Requirements

    Table 12. Maximum Inrush Current per 415 W Power Supply Model 8265-17S 20 A Table 13. Site Power Requirement Recommendations Model 90-256 V (47/63 Hz) -48 Vdc 8265-17S 2.2 kVA — IBM 8250, 8260, and 8285: Planning and Site Preparation Guide...

  • Page 63: Ventilation Requirements

    Table 14. Leakage Current With Four 415 W Power Supplies Model 8265-17S 2.1 mA Ventilation Requirements Three fan units draw air in through the front and center of the chassis and exhaust air out the back. To ensure that the fans provide adequate ventilation, you must allow a minimum of 15 cm (6 in.) between the rear of the switch and the nearest wall (or other vertical surface).

  • Page 64: Magnetic Compatibility

    Very low humidity (usually less than 20%) • Metal-framed furniture. If any of the previous factors are present at your site, review the building with your IBM representative or LAN installation provider. IBM 8250, 8260, and 8285: Planning and Site Preparation Guide...

  • Page 65: Appendix B. Module Specifications

    Appendix B. Module Specifications This appendix describes the modules that you can use with the IBM 8265 Nways ATM Switch. For details on supported 8260 ATM media modules, refer to page 71. Controller Module (Feature Code 8000) Faceplate marking: 8000-RCTL...

  • Page 66: 155Mbps Module (Feature Code 6540)

    0°C to 50°C (32°F to 122°F) Humidity: Less than 95% non-condensing Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide Front panel indicators: Module Status LED, Port LEDs (Status, Activity, and Error), Reset LED.

  • Page 67: Daughter Cards For 4-Port 155Mbps Flex Modules (Feature Code 6543)

    NZS 6661 Multimode Fiber I/O Card (Feature Code 6580) Faceplate marking: Connector: Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide Singlemode Fiber I/O Card (Feature Code 6581) Faceplate marking: Connector:...

  • Page 68: Figure 19. 155Mbps Module Utp/Stp Daughter Card

    UTP/STP I/O Card (Feature Code 6582) Faceplate marking: Connector: RJ-45 Face Plate Opening for RJ45 Connector Figure 19. 155Mbps Module UTP/STP Daughter Card IBM 8265: Product Description...

  • Page 69: 622Mbps Module (Feature Code 6511)

    Operating temperature: 0°C to 50°C (32°F to 122°F) Humidity: Less than 95% non-condensing Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide 622Mbps Module (Feature Code 6512) Faceplate marking: A1-SF622...

  • Page 70: 4-Port Fiber 100Mbps Module (Feature Code 5104)

    0°C to 50°C (32°F to 122°F) Humidity: Less than 95% non-condensing Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide 12-Port 25Mbps Concentration Module (Feature Code 5012) Faceplate marking: A12-TP25...

  • Page 71: Wan 2 Module (Feature Code 5602)

    WAN 2 Module (Feature Code 5602) Faceplate marking: A8-WAN Connectors: See daughter cards below Number of ports: 8 maximum Switch interface 16-bit, 20ns (256Mbps) Power requirements: 18.4 W at +5 Vdc Operating temperature: 0°C to 50°C (32°F to 122°F) Humidity: Less than 95% non-condensing Daughter Cards for WAN 2 Module DS3 I/O Card (Feature Code 8502)
  • Page 72 7.9 W at +5 Vdc Maximum link distance: 2.2 km (1.36 miles) Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide STM-1 SMF I/O Card (Feature Code 8505) Faceplate Marking:...

  • Page 73: Figure 21. Wan Module Oc3/Stm-1 Daughter Card

    Power requirements: 7.9 W at +5 Vdc Maximum link distance: 20 km (12.42 miles) Optical Specifications: For details, refer to the IBM 8265 Nways ATM Switch , SA33-0460 Planning and Site Preparation Guide OC3/STM-1 Opening for Daughter Card Fiber Light...

  • Page 74: Carrier Module (Feature Codes 5102)

    Number of ports: 8 video, 8 audio Connectors: BNC for video, 5-pin mini-DIN for audio Cable type: RG59/U (75 ohm) for video • unbalanced audio cable for audio • Power consumption: 62.5 W at +5 Vdc IBM 8265: Product Description...

  • Page 75: 8271 Atm/Ethernet Lan Switch Module (Feature Code 5212)

    8271 ATM/Ethernet LAN Switch Module (Feature Code 5212) Faceplate marking: A-E12LS2 Number of slots: Numbers of UFCs: Number of ports: Switch interface 16-bit, 20ns (256Mbps) Power consumption: 58.5 W at +5 Vdc Data rate: 10Mbps Port connector: RJ-45 8271 ATM/Ethernet LAN Switch Module (Feature Code 5312) Faceplate marking: A-E12LS4 Number of slots:...

  • Page 76: Universal Feature Cards For 8271 Lan Switch Modules

    Figure 22. 4-port Ethernet 10BASE-T UFC 3-Port Ethernet 10BASE-FL UFC (Feature Code 8603) Number of ports: Connector: Date rate: 10Mbps Cable type: Multimode fiber Power consumption: 6.7 W at +5 Vdc Link/FDX Testing/Fault Port # Figure 23. 3-Port Ethernet 10BASE-FL UFC IBM 8265: Product Description...

  • Page 77: Figure 24. 1-Port Ethernet 100Base-Tx Ufc

    1-port Ethernet 100BASE-Tx UFC (Feature Code 6995) Number of ports: Connector: RJ-45 Date rate: 100Mbps Cable type: STP, UTP Category 5 Power consumption: 5.7 W at +5 Vdc Link/FDX MDI-X Testing/Fault Figure 24. 1-port Ethernet 100BASE-Tx UFC 1-Port Ethernet 100BASE-Fx UFC (Feature Code 7000) Number of ports: Connector: Date rate:...
  • Page 78 1-Port ATM/Ethernet UFC (Feature Code 6988) Number of ports: Connector: Date rate: 155Mbps Cable type: Multimode fiber Power consumption: 25 W at +5 Vdc IBM 8265: Product Description...

  • Page 79: 8272 Atm/Token-Ring Lan Switch Module (Feature Code 5208)

    8272 ATM/Token-Ring LAN Switch Module (Feature Code 5208) Faceplate marking: A-TR8LS2 Number of slots: Numbers of UFCs: Number of ports: Switch interface 16-bit, 20ns (256Mbps) Power consumption: 67.5 W at +5 Vdc Data rate: 4Mbps or 16Mbps Port connector: RJ-45 8272 ATM/Token-Ring LAN Switch Module (Feature Code 5308) Faceplate marking: A-TR8LS4...

  • Page 80: Universal Feature Cards For 8272 Lan Switch Modules

    Date rate: 4Mbps or 16Mbps Cable type: Multimode fiber Power consumption: 8 W at +5 Vdc (Feature Code 6985) 11 W at +5 Vdc (Feature Code 5087) RIRO Connect Tx/Rx Figure 27. 2-Port Token-Ring Fiber UFC IBM 8265: Product Description...
  • Page 81 1-Port ATM Multimode Fiber/Token-Ring II UFC (Feature Code 2762) Number of ports: Connector: Date rate: 155Mbps Cable type: Multimode fiber Power consumption: 25 W at +5 Vdc Appendix B. Module Specifications...
  • Page 82 IBM 8265: Product Description...

  • Page 83: Appendix C. Power Consumption

    STM-1 MMF I/O Card 8506 — STM-1 SMF I/O Card 8505 — OC3 MMF I/O Card 8504 — OC3 SMF I/O Card 8503 — Note: Feature Code varies according to country (see page 24.) © Copyright IBM Corp. 1994, 1998...
  • Page 84 6995 — 1-port Ethernet 100BASE-Fx 7000 — 1-port ATM/Ethernet 6988 — Universal Feature Cards for 8272 ATM/Token-Ring LAN Switch Modules: 4-port Token-Ring UTP/STP 5092 — 2-port Token-Ring Fiber 5087 — 1-port ATM MMF/Token-Ring II 2762 — IBM 8265: Product Description...

  • Page 85: Appendix D. Supported 8260 Atm Modules

    Appendix D. Supported 8260 ATM Modules This appendix lists the 8260 ATM modules that you can use with the IBM 8265 Nways ATM Switch. ATM Modules Type Connector Number Slot Faceplate Type(s) of Ports Width Marking 4-Port 100Mbps A4-SC100 4-Port 100Mbps...

  • Page 86: Table 16. Minimum Fpga Levels Required For 8260 Atm Modules

    If your 8260 ATM module does not have the specified FPGA level (or higher), upgrade the module before removing it from the 8260, using MES 5099. For information on how to upgrade FPGA code, refer to IBM 8260 Nways Multiprotocol Switching Hub, ATM Control Point and Switch Module Installation and User’s Guide , SA33-0326.

  • Page 87: Appendix E. Notices

    IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any of IBM’s intellectual property...

  • Page 88: Safety Information

    IBM 8265 Nways ATM Switch using Safety Extra Low Voltages (SELV) only. In order to maintain the separate (independent) approval of the IBM adapters, it is essential that other optional cards, not supplied by IBM, do not use mains voltages or any other excessive voltages. Seek advice from a competent engineer before installing other adapters not supplied by IBM.

  • Page 89: Industry Standards Reflected In This Product

    Industry Standards Reflected in This Product The IBM 8265 Nways ATM Switch is designed according to the specifications of the following industry standards as understood and interpreted by IBM as of October 1992. International Organization for Standardization (ISO) • ISO 8802/1 •...

  • Page 90: Electronic Emission Notices

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.

  • Page 91: Radio Frequency Interference (Rfi) Compliance

    • CISPR22 Class A. Trademarks and Service Marks AIX, IBM, NetView, and Nways are trademarks of International Business Machines in the United States and/or other countries. ProComm is a trademark of Data Storm Technologies Corporation. UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
  • Page 92 IBM 8265: Product Description...

  • Page 93: Bibliography

    GA27-4173 The 8260 Nways ATM Kit Development Program, We Carry Your Creativity to ATM GA33-0371 These publications are included on the IBM 8265 ATM Switch Documentation Library CD, SA33-0454. The above documentation is also available via the Internet at www.networking.ibm.com/did/8265bks.html.
  • Page 94 IBM 8265: Product Description...

  • Page 95: Index

    (155Mbps) for 12-port 25Mbps 34, 56 OC3 for WAN 2 module 36, 59 power requirements 69 notices STM-1 for WAN 2 module 36, 58 federal communications commission (FCC) twisted pair for 4-port 155Mbps 28, 54 statement 76 © Copyright IBM Corp. 1994, 1998...
  • Page 96 6 switch overview 1 trademarks 77 universal feature cards 100BASE-Fx for 8271 42, 63 100BASE-Tx for 8271 42, 63 10BASE-FL for 8271 42, 62 10BASE-T for 8271 42, 62 ATM/Ethernet for 8271 42, 64 IBM 8265: Product Description...
  • Page 97 If you prefer sending comments by FAX or electronically, use: • FAX: 33 4 93 24 77 97 • E-mail: FRIBMQF5 at IBMMAIL • IBM Internal Use: LGERCF at LGEPROFS • Internet: rcf_lagaude@vnet.ibm.com In advance, thank you. Your comments:...
  • Page 98 GA33-0449-02 Fold and Tape Fold and Tape Please do not staple PLACE POSTAGE STAMP HERE IBM France Centre D’Etudes et Recherches Service 0798 - BP 79 06610 La Gaude France Fold and Tape Fold and Tape Please do not staple...
  • Page 100 Printed in Denmark GA33-0449-02...

Table of Contents