Automatic Cleaning - Icaresystem; General Safety Information - Rational iCombi Pro Original Instructions For Use

15

Automatic cleaning - iCareSystem

The iCareSystem is the intelligent cleaning and descaling system in the iCombi Pro. It recognises how dirty the
unit is and proposes the ideal cleaning program and the optimal quantity of care products.
Eco mode
Cleaning programs
Cleaning status
15.1

General safety information

Only use the manufacturer's recommended Active Green cleaner tabs and care tabs
n
in automatic cleaning.
To avoid scalding and burn injuries:
Allow the unit and all functional components to cool down before starting
n
automatic cleaning.
To avoid severe chemical burns:
Cleaning and care products can cause severe eye damage and chemical burns to
n
the skin. Always wear securely fitting safety eyewear and chemical-resistant
gloves when cleaning the unit.
Keep the cooking cabinet door closed during automatic cleaning. Otherwise, hot
n
steam and corrosive cleaning chemicals could escape. If you open the cooking
cabinet door during automatic cleaning, a warning signal will sound.
Make sure the core temperature probe is not dangling out of the unit while
n
automatic cleaning is in progress. This could damage the seal on the cooking
cabinet door and allow corrosive cleaning chemicals to escape.
Do not clean the externally attached core temperature probes using automatic
n
cleaning.
Before preheating the unit for cooking, remove all cleaning products and cleaning
n
product residues.
How to respond if you come into contact with cleaning chemicals:
If you touch cleaning agents when not wearing gloves or your skin otherwise
n
comes into contact with Active Green cleaner tabs, rinse your skin with running
water for 10 minutes.
Original instructions for use
15 | Automatic cleaning - iCareSystem
Normal mode
Care status
89 / 112