Options - Rational iCombi Pro Original Instructions For Use

5 | Intelligent cooking - iCookingSuite
remaining time
This is how much longer the intelligent cooking path will take to complete.
End of cooking path
The cooking path is finished.
5.4.5

Options

Once you have started a cooking path, all available options are shown. The options Crisp and Hold can be selected
while the cooking path is running. The options Move core temperature probe, New batch, Continue with time or
Brown and crisp can only be selected if the end of the cooking path is reached.
Hold
Use this option either to hold the cooking cabinet climate for a period of time, or to maintain the food's core
temperature. Choosing this option will hold the preset cooking cabinet temperature or core temperature for up to
24 hours in order to keep it from overcooking. We recommend only using the Hold option for brief periods, in
order to minimize cooking losses.
In some cooking paths, such as overnight cooking, Holding is the final step of the process, and will be started
automatically once your desired results have been obtained. When preparing products of different sizes, plan a
longer holding phase so that all pieces of food have time to reach the desired core temperature.
Smaller pieces of meat, wild game, and well-aged meat should not remain in the cooking cabinet on Hold for too
long. Very young, insufficiently aged beef, on the other hand, will become very tender.
1. To adjust the parameters of the option Hold, press the button:
2. Adjust the parameters as desired.
>>
Once the cooking path is ended, the cooking step Hold is started automatically.
Move
Select this option if you are cooking foods of different sizes or different foods with different cooking levels using
the core probe:
1. When the set core temperature has been reached, open the cooking cabinet door.
2. Reinsert the core temperature probe into a large piece, or into a piece with a higher target core temperature.
3. Remove the smaller or lower-temperature pieces of food from the cooking cabinet.
4. Close the cooking cabinet door.
5. Press this button:
>
A window appears, where you can set the core temperature.
6. Select the desired core temperature.
>>
The amount you set will be applied automatically within a few seconds.
Repeat this step until all the food has reached the desired core temperature.
New batch
Use this option to load another batch into the unit and resume the same cooking path with the defined cooking
parameters.
You will be prompted to unload the cooking system first and then load it again. Once you have loaded a new batch
into the cooking system and closed the cooking cabinet door, the cooking path will resume.
Continue with time
Use this option to continue the cooking path for a specific amount of time. If you select the option at the end of
the cooking path, a window appears where you can set the duration with which the cooking path is to be
continued.
1. Select the desired time.
>>
The amount you set will be applied automatically within a few seconds.
40 / 112 Original instructions for use