Error Messages Heating Hot Air; Error Messages Humidity - Rational iCombi Pro Original Instructions For Use

17 | Inspiration and help
Error report
Service 32.3
Service 33.1
Service 33.2
Service 33.3
Service 34.32
Service 60
17.4.3

Error messages heating hot air

Error report
Service 20.1
Service 28.1
Service 28.2
Service 34.1
Service 34.2
Service 34.4
Service 42.3
Service 42.6
Service 43.3
17.4.4

Error messages humidity

Error report
Service 20.2
Service 20.4
Service 30
Service 36
Service 37
Service 42.2
Service 43.2
100 / 112
Cause
Close the shut-off valve on the gas line.
The gas burner is faulty.
Close the shut-off valve on the gas line.
The gas burner is faulty.
Close the shut-off valve on the gas line.
The gas burner is faulty.
Close the shut-off valve on the gas line.
The gas burner is faulty.
Close the shut-off valve on the gas line.
The internal data communication is faulty.
The initialisation of the ignition box is
defective.
Switch the unit off and on again. If the
error is still displayed, call your Service
Partner.
Cause
The temperature probe is defective.
The temperature limit of the steam
generator has been exceeded.
The temperature limit of the cooking
cabinet has been exceeded.
The internal data communication is faulty.
The internal data communication is faulty.
The internal data communication is faulty.
The water supply is faulty.
The water supply is faulty.
The internal water supply is not closing.
Cause
The temperature probe is defective.
The temperature probe is defective.
The humidity measurement is incorrect.
The differential pressure sensor is
defective.
The differential pressure sensor is
defective.
The water supply is faulty.
The internal water supply is not closing.
Cooking possible
No
No
No
No
Yes
–
Cooking possible
No
No
No
No
No
No
The steam injection function is
not available.
Yes
Only the convection mode is
available at the moment.
Cooking possible
Yes
Yes
Yes
Yes
Yes
Yes
Only the convection mode is
available at the moment.
Original instructions for use