Iproductionmanager 3D; Cleaning; Forced Cleaning; Cleaning Schedule - Rational iCombi Pro Original Instructions For Use

13 | Settings
13.6.9

iProductionManager 3D

Use this setting to specify that you want to load two trays per level in iProductionManager. Each tray will be
monitored separately. Please note that no more than 12 levels can be displayed at once.
1. To activate the function, press this button: ON
>>
The setting will be applied immediately.
13.7

cleaning

1. Press this button:
2. Press this button:
13.7.1

Forced cleaning

Here, you can select the period after which you wish to be prompted to clean the unit. You can only continue
working with the unit once the cleaning is complete. This enables you to ensure that the cleaning and hygiene
regulations are complied with in shift operation. More information is available here: Forced cleaning [} 92]
13.7.2

Cleaning schedule

Here, you can set the weekdays on which a forced cleaning should be carried out. This enables you to ensure that
the cleaning and hygiene regulations are complied with in shift operation. More information is available here:
Cleaning schedule [} 92]
13.8

Data management

Please note that Data Management functions will only be available once you have plugged a USB stick into the
unit.
1. Press this button:
2. Press this button:
You can change the following settings:
Exporting HACCP data [} 77]
n
Exporting error statistics logs [} 78]
n
Exporting and importing programs [} 77]
n
Exporting and importing profiles [} 77]
n
Exporting and importing unit default settings [} 78]
n
76 / 112
Cleaning
Data management
Original instructions for use