Component Check - Frymaster FilterQuick easyTouch FQG60T Service Manual

1.5 Component Check

The FQ4000 controller has a function to check the major components and their status.
With the controller soft powered OFF, press the HOME button. Select Service, Service, Enter 9000, Select Tech
Modes, scroll down and select Component Check.
The component name is above each button. The status of the component is below the function. Pressing the
button will change the status of the function to what is stated on the button. If the button is shaded that function is
not available unless that function is enabled (such as bulk). The JIB reset button and Waste Tank full only displays
the status of the switch.
1-5
Pressing the home button to exit
the function will display driving
valves to ensure all valves return
to home state. Once completed
the controller will display FILL VAT
FROM DRAIN PAN? YES NO.
Press YES to ensure that any oil in
the filter pan is returned to the
vat.