Webasto ThermoConnect TCon2 Operating And Installation Instructions page 9

Fig. 11
2
Fig. 12
u Install the ThermoConnect mobile app
on the phone.
u Connect the phone with the Thermo-
Connect TCon2 following the instruc-
tions on the mobile phone app. See
chapter 13.2 "Connect the mobile
2
phone" on page 9.
13.2 Connect the mobile phone
Make sure that you have the Thermo-
Connect mobile app installed.
9040092A
Step 1 of 4
Fig. 13
WHE000023A
u Launch the mobile app by clicking the
Webasto icon.
Step 2 of 4
WHE000024A
4
Fig. 14
3
u
Scan the QR code using the phone
camera. The QR code should be affixed
to the vehicle and to the backpage of
this manual. The QR code can also be
find on the receiver. (See chapter 12
"QR-code labels" on page 8).
2
Step 3 of 4
WHE000025A
4
Fig. 15
3
Now any name can be entered for the
ThermoConnect TCon2 and be confirmed
by clicking "OK" or "Create".
Step 4 of 4
1
u
ThermoConnect TCon2 is now connec-
ted and ready for use. For more inform-
2
ation, see "https://www.webasto-com-
WHE000026A
fort. com".
13.3 User management
More than one user (up to 10) may use the
ThermoConnect TCon2. When adding new
users (see chapter 13.2 "Connect the mo-
bile phone" on page 9), an identification
message is required from the new user. Ex-
isting users receive this message as a noti-
fication in their ThermoConnect mobile app
and must confirm or deny a new user. If
the user gets a new phone and tries to pair
the mobile phone without access to the
previously paired phone, the confirmation
EN
1
WHE000027A
9