Mobile Phone App; My Webastoconnect Web Service; Mobile Network Connection; Installation And Electrical Connection - Webasto ThermoConnect TCon2 Operating And Installation Instructions

u
Release the pushbutton.
u
Press the pushbutton 3 times while the
illumination of the pushbutton is blink-
ing.
7

Mobile phone app

NOTE
To install the app: See chapter 13.1
"Install the app on mobile phone" on
page 8.
NOTE
Not all settings can be controlled by
using the app. More settings are avail-
able in the web service. See chapter 8
"My WebastoConnect web service" on
page 5.
ThermoConnect TCon2 is controlled by the
ThermoConnect mobile app. It is operated
using any network-connected compatible
mobile phone.
8 My WebastoConnect
web service
NOTE
All app settings are also available in My
WebastoConnect and will be synchron-
ised automatically. Context-specific
help for each setting is available in My
WebastoConnect service.
9040092A
ThermoConnect TCon2 settings can be
controlled using the My WebastoConnect
web service
9 Mobile network
connection
A mobile phone with the ThermoConnect
TCon2 app is necessary to use the Thermo-
Connect mobile app. For more information
see chapter 13.1 "Install the app on mobile
phone" on page 8. An active Thermo-
Connect subscription is required to be able
to use this device. A subscription fee is ne-
cessary.
9.1 Subscription
When subscription period nears expiration
a reminder will be sent to the ThermoCon-
nect mobile app and / or to user E-mail (if
given in My WebastoConnect service).
9.2 Subscription renewal
NOTE
If service subscription is not renewed
before expiration then service will be
suspended. To resume suspended ser-
vice, a reactivation fee is applied.
Check and renew the current subscription
in My WebastoConnect web service.
10 Installation and
electrical connection
10.1 Scope of Delivery
1
2
3
4
Fig. 2
ThermoConnect TCon2
Wiring harness
Pushbutton (with illumination and
temperature sensor)
QR-code labels (2x)
Not illustrated:
EN
WHE000016A
5