6 - Maintenance
10 hours service - In-Line filter (optional equipment)
If the boom is equipped with In-Line Filters unscrew the filter bowl
to inspect and clean the filter. When reassembling the O-ring should
be greased.
Alternative filter meshes are available. See section on Technical spe-
cifications - Filters and nozzles.
10 hours service - Nozzle filters
Check and clean.
10 hours service - Spraying circuit
Fill with clean water, operate all functions and check for leaks using higher spray pressure than normal. Check nozzle
spray patterns visually using clean water.
10 hours service - Brakes (optional equipment)
Apply brake pedal and check function of trailer brakes.
10 hours service - Brakes air tank (optional equipment)
Drain the air tank for condensed water at the drain valve.
10 hours service - Hydraulic oil level
Check that the oil level is between min. and max. on the sight glass.
Clean the area areound the filling cap carefully and add fresh, clean
oil if the level is low. Regarding oil quality - see section the section
"Lubricants".
6.5