3 - Description
LookAhead Liquid system
General info - MANIFOLD system
All functions of the spray circuits are operated via the centrally situated MANIFOLD with colour coded pictorial symbols
for easy operation.
Pump
A diaphragm pump with 6 diaphragms, model 463, with easily accessible valves and diaphragms. Standard = 540 r.p.m.
(6 splines). Optional = 1000 r.p.m. (21 splines).
FlexCapacity pump system (optional equipment)
The CM 6600 can be equipped with FlexCapacity pump system. The FlexCapacity pump system consists of standard
463/12 pump which is set up as in a standard system with PTO drive. Furthermore the system is added a 463/10 pump
driven by a hydraulic motor. The hydraulic motor is supplied from a seperate outlet on the tractor and can therefore be
turned on/off independently when needed.
Valves and symbols
The valves at the MANIFOLD are distinguished by coloured identification on the function labels. Symbols corresponding
to every possible function of use are located on the discs for easy identification and operation. A function is activated by
turning the handle towards the desired function.
ATTENTION! Only the functions in use should be open - always close remaining valves.
ATTENTION! If a MANIFOLD valve is too tight to operate - or to loose (= liquid leakage) - the valve needs to be ser-
viced. Please see the section 'Maintenance' for further information.
Suction valve = Blue symbols
The active function is indicated by the indicator.
Suction from main tank
Suction from external tank
Pressure valve = Green symbols
The active function is indicated by the indicator.
Filling of main tank
Internal tank cleaning
3.4
Suction from rinsing tank
Spraying
Pressure emptying