Chemical Container Cleaning Grip - Yellow Label; Easyclean Filter; External Filling Device Valve - Red Labels (Optional Equipment) - Hardi COMMANDER TWIN FORCE Series Instruction Book

Table of Contents

3 - Description

Chemical container cleaning grip - Yellow label

The grip are used for two purposes:

When ChemFiller lid is open: For cleaning empty containers. Put con-

tainer over the flushing nozzle in the middle of the ChemFiller so that

the nozzle is inside the container. By squeezing the Chemical

Container Cleaning grip the flushing nozzle in the middle of the

ChemFiller is activated.

When ChemFiller lid is closed: Use the Chemical Container Cleaning

grip to rinse the hopper after filling of chemicals has ended.

Chemical container cle-

aning

DANGER! Do not press lever unless the multi-hole nozzle is covered by a container to avoid spray liquid hitting the

operator.

The EasyClean filter is fitted in the working zone near the Smart

Valves. It has a built-in valve that automatically closes when the filter

is opened for inspection and cleaning. To open filter then turn it

counterclockwise and pull it up, like shown on picture.

Beside the spray pressure gauge on the platform a EasyClean clog-

ging indicator is located.

Green indicator: No cleaning necessary.

Yellow indicator: It is possible to finish an ongoing spraying job and

then clean filter afterwards.

Red indicator: Clean EasyClean filter immediately as filter is clogged.

The valve is used when filling from an external tank or reservoir.

Activating valve starts/stops the filling proces. Note that suction

SmartValve must be positioned at "Suction from Main tank" or "suction

from an external source" to make the valve work.

External Filling Device

3.10

Table of Contents