Motor Parameters - Watt Drive V2500 Series Manual

Group 7: Motor Parameters
Para-
Explanation
meters
07-00 Motor Rated Current
07-01 Motor No-Load Current
07-02 Torque Compensation
07-03 Slip Compensation
07-04 Number of Motor Poles
07-05 Motor Auto Detection
Motor Line-to-line Resistance
07-06
R1
07-07 Reserved – Do Not Change!
07-08 Motor Rated Slip
07-09 Slip Compensation Limit
07-10 Reserved – Do Not Change!
07-11 Reserved – Do Not Change!
Torque Compensation Time
07-12
Constant
Slip Compensation Time
07-13
Constant
Accumulative Motor Operation
07-14
Time (Min.)
Accumulative Motor Operation
07-15
Day
Settings
30 to 120% (of AC drive output current)
0 to 90% (of AC drive output current –
less than Pr.07-00)
0.0 to 10.0
0.0 to 3.0
2 to 10
00: Disable
01: Enable static motor detection
(+ press RUN key)
02: Enable dynamic motor detection
(+ press RUN key)dynamic
WARNING: Motor must run free!!
0 to 65535 mΩ
0.00 to 20.00 Hz
0 to 250% (% of Pr. 07-08)
0.01 ~10.00 Sec
0.05 ~10.00 Sec
00 to 1439 Min.
00 to 65535 Day
8-11
Factory Actual
Setting Setting
100
40
0.0
1.0
4
00
00
3.00
200
0.05
0.10
8
00
00