Watt Drive V2500 Series Manual page 24

CHAPTER 3: WIRING
15 – 22 kW
-
R/L1 S/L2 T/L3 +1 +2
V/T2 W/T3
( ) + - ( )
DC DC
POWER IM MOTOR
3
Control Terminal
Torque: 0.4 Nm (3 in-lbf)
Wire: 12-24 AWG (0.25 – 4 mm²)
Power Terminal
Torque: 3 Nm (26 in-lbf)
Wire: 2-8 AWG (10 – 35mm²)
Wire Type: stranded copper only, 75°C
NOTE: If wiring of the terminal utilizes the wire with a 1AWG-diameter (40mm²), it is
thus necessary to use the Recognized Ring Terminal to conduct a proper wiring.
3-14