Table of Contents
Advertisement
Group 2: Operation Method Parameters
Para-
Explanation
meters
Source of First Frequency
02-00
Command
Source of First Operation
02-01
Command
02-02 Stop Method
02-03 PWM Carrier Frequency
02-04 Motor Direction Control
2-wire/3-wire Operation
02-05
Control Modes
02-06 Line Start Lockout
02-07 Loss of ACI Signal
Up/Down Key Mode /
02-08
Jog mode
The Accel/Decel Speed of the
02-09
UP/DOWN Key with Constant
Speed
Settings
00: Digital keypad or Inc./Dec. Frequ.
01: 0 to +10Vdc from AVI
02: 4 to 20mA from ACI
03: -10 to +10Vdc from AUI
04: RS-485 communication interface
05: RS-485 communication interface. It
won't memorize the frequency.
06: Combined usage of the master and
auxiliary frequency command
02-10, 02-11,02-12
00: Determined by digital keypad
01: Master frequency determined by
external terminal, keypad STOP
enabled.
02: Master Frequency determined by
external terminal, keypad STOP
disabled.
03: Master Frequency determined by
RS-485 communication interface,
keypad STOP enabled.
04: Master Frequency determined by
RS-485 communication interface,
keypad STOP disabled.
00: Ramp Stop; E.F. coast stop
01: Coast Stop; E.F. coast stop
02: Ramp Stop; E.F. ramp stop
03: Coast Stop; E.F. ramp stop
1 – 5 HP: 01-15kHz
7.5 – 22 HP: 01-15kHz
30 – 60 HP: 01-09kHz
75 – 100 HP: 01-09kHz
00: Enable REV operation
01: Disable REV operation
02: Disabled FWD operation
00: FWD/STOP, REV/STOP
01: FWD/REV, RUN/STOP
02: 3-wire Operation
00: Disable
01: Enable
00: Decelerate to 0 Hz
01: Stop immediately and display "EF"
02: Continue operation by last
frequency command
00: Based on accel/decel time
01: Constant speed/msec (02-09)
0.01~1.00 Hz/msec
8-3
Factory
Actual
Setting
Setting
01
01
8
00
05
05
04
04
00
00
01
01
00
0.01
Hide quick links:
Advertisement
Table of Contents
