Watt Drive V2500 Series Manual page 5

DANGER!
!
The AC drive may be destroyed beyond repair if incorrect cables are connected to
the input/output terminals.
V/T2, and W/T3 directly to the AC main circuit power supply.
CAUTION!
!
Turn power on only when the DC-link capacitors are fully discharged.
CAUTION!
Heat sink may heat up over 70°C, during the operation. Do not touch the heat sink.
All of the above instructions, together with any other requirements,
recommendations, and safety messages highlighted in this manual must be strictly
Never connect the AC drive output terminals U/T1,
complied with.
0-3
0