Terminal Explanations; Control Terminals Explanations - Watt Drive V2500 Series Manual

3.2 Terminal Explanations

Terminal Symbol
R/L1, S/L2, T/L3
U/T1, V/T2, W/T3
+1,+2
+2/B1-B2
+2 - -(minus sign)
+2/B1- -(minus sign)

3.3 Control Terminals Explanations

Terminal Symbols
FWD
REV
JOG
EF
TRG
DI1
DI2
DI3
DI4
DI5
DI6
DFO
+24V
DIC
Explanation of Terminal Function
AC line input terminals
AC drive output terminals motor connections
Connections for DC Link Reactor (optional)
Connections for Braking Resistor (optional)
Connections for External Braking Unit (V2500 series)
Earth Ground
Terminal Functions
Forward-Stop command
Reverse-Stop command
Jog command
External fault
External counter input
Multi-function Input 1
Multi-function Input 2
Multi-function Input 3
Multi-function Input 4
Multi-function Input 5
Multi-function Input 6
Digital Frequency Meter
(Open Collector Output)
DC Voltage Source
Digital Signal Common
3-9
Factory Settings
Refer to Pr.04-04 to Pr.04-09
Multi-function Input Terminals
Factory setting 1:1
(Maximum 48VDC, 50mA)
(+24V, 20mA), used for source
mode.
Used as common for digital
inputs and used for sink mode.
3