Engine - Toro Groundmaster Series Service Manual

Engine

g297765
1. Cap screw
2. Negative (-) battery cable
3. Wire harness ground
4. Throttle cable (model 31900 and
31901 only)
5. Pump pulley
6. Drive belt idler arm
7. Cap screw
Removing the Engine
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
(model 31900 and 31901 shown)
8. Flange nut (2 each)
9. PTO clutch stop strap
10. Cap screw
11. PTO clutch
12. Pump drive belt
13. Square key
14. Stub shaft
Refer to Figure 17 for this procedure.
1. Remove the radiator and hydraulic fluid cooler; refer to
Radiator and Hydraulic Fluid Cooler (page
2. Remove the exhaust tube; refer to
System (page 4–11).
3. Disconnect the fuel supply hose from the fuel/water separator, and the fuel
return hose from the fuel tank; refer to
4. Remove the fuel/water separator assembly from its support bracket.
Figure 17
15.
16.
17.
18.
19.
20.
21.
Removing and Installing the Exhaust
Fuel System (page
Page 4–19
Cap screw (8 each)
Cap screw (3 each)
Flat washer (3 each)
Spacer (3 each)
Snubbing washer (3 each)
Flange nut (3 each)
Engine lift lugs
Removing the
4–14).
4–16).
Engine: Service and Repairs