Toro Groundmaster Series Service Manual page 147

Priming the Hydraulic Pumps (continued)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
7. Engage the remote starter switch and crank the starter for 15 seconds to
prime the hydraulic pump. Wait for 30 seconds to allow the starter motor and
starter solenoid to cool. Repeat the cranking procedure for the second time.
8. Disconnect the remote starter switch leads from the machine.
9. Charge the hydraulic system; refer to
5–62).
Charging the Hydraulic System (page
Page 5–61 Hydraulic System: Service and Repairs