General Information; Traction Unit Operator's Manual And Accessory Installation Instructions; Yanmar Engine Electrical Components - Toro Groundmaster Series Service Manual

General Information

Traction Unit Operator's Manual and Accessory Installation
Instructions

Yanmar Engine Electrical Components

Electrical System: General Information
Before performing any welding on the machine, turn the key switch
to the O position. To prevent damage to the machine electrical
FF
system, disconnect the ground (-) cable to the frame when welding
on the frame.
The traction unit Operator's Manual and accessory Installation Instructions
provide information regarding the operation, general maintenance and
maintenance intervals for the machine and its accessories. Refer to the traction
unit Operator's Manual and accessory Installation Instructions for additional
information.
When servicing or troubleshooting the engine electrical components (including
the coolant temperature sender, the oil pressure switch, and the fuel solenoid
for models 31900, 31901, 31907 and 31909 machines), use the correct engine
service manual and troubleshooting manual. Yanmar engine service and
troubleshooting manuals are available online, on the Toro Service Reference
flash drive, and in print from your authorized Toro Distributor.
IMPORTANT
Page 6–2 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A