Relays With 4 Terminals - Toro Groundmaster Series Service Manual

Relays with 4 Terminals

g304775
1. Operator's console
2. Relay – fuel solenoid pull coil
g306841
1. Frame crossmember
2. Cab power relay
Electrical System: Testing the Electrical Components
3. Washer
4. Relay – main power
The Groundsmaster 3200 machine uses 3 identical relays that have 4 terminals.
The Groundsmaster 3300/3310 machines use 2 identical relays that have 4
terminals. The relays are located in the operator's console. A tag near the wire
harness relay connector can be used to identify each relay.
Groundsmaster 3310 machines have an additional 4 terminal relay used to
control the cab control circuits located along the frame crossmember in front
of the engine.
An additional 4 terminal relay is part of the optional horn kit and is located in the
steering column control pod.
Relays with 4 terminals:
Figure 93
Figure 94
3. Steering column control pod (optional)
4. Horn relay (optional)
Page 6–42
5. Relay – glow plug
6. Panel fastener
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A