Toro Groundmaster Series Service Manual page 72

Installing the Air Cleaner Assembly (continued)
Engine: Service and Repairs
Any leaks in the air cleaner system will allow the dirt into the engine
and will cause serious engine damage. Ensure that all air cleaner
components are in good condition and are properly secured during
assembly.
1. Assemble the air cleaner if necessary.
g295817
1. Service indicator
2. Pipe nipple
3. Air cleaner housing
4. Flange nut (2 each)
A. If the service indicator or pipe nipple were replaced:
• Apply sealant to the threads of the nipple and install the nipple in the air
cleaner housing. Tighten the nipple to 3.4 N·m (30 in-lb).
• Apply sealant to the threads of the nipple and install the service
indicator to the nipple. Tighten the service indicator to 1 N·m (10 in-lb).
B. Ensure that the vacuator valve is pointed downward after installation.
2. Assemble the remaining air cleaner components if necessary.
IMPORTANT
Figure 12
5. Air cleaner bracket
6. Air filter element
7. Vacuator valve
8. Air cleaner cover
Page 4–10 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A