Planmeca Compact i3 User Manual page 152

22 Operating instruments
Generating model
Selecting scanning mode
Starting scanning
Taking image
144 Planmeca Compact i3
Push the left-side knob down to generate a model of the scanned area.
To move upward in the list of scan type selection tools in the Planmeca
Romexis menu on the monitor, push the foot control pedal to the left.
To move downward in the list of scan type selection tools in the Planmeca
Romexis menu on the monitor, push the foot control pedal to the right.
Briefly push the foot control pedal down to start the scanning.
Push and hold down the foot control pedal to take an image.
User's manual