Planmeca Compact i3 User Manual page 174

24 Programming
24.6.3 Gesture sensor
Steps
166 Planmeca Compact i3
1. Press Program.
2. Press Operating light or Composite mode. Both buttons open the same
pop-up window.
Sensor tab.
3. Open the
4. Toggle the gesture sensor button to enable/disable the gesture sensor.
A grey button means that the function is disabled, and a blue button that
the function is enabled.
5. Adjust the distance at which the gesture sensor on the operating light
reads your hand movements by dragging the handles to a suitable
position.
6. Press OK.
User's manual