Resetting - Launch CReader 6011 User Manual

CReader 6011/7001/7001F/8001/8011/8021/9081
LAUNCH
English User's Manual
Figure 5-4

5.3 Resetting

There are two methods to reset service lamp: Manual reset or Auto reset. Auto
reset follows the principle of sending command from the CReader to vehicle's
ECU to do resetting. While using manual reset, users just follow the on-screen
instructions to select appropriate execution options, enter correct data or values,
and perform necessary actions, the system will guide you through the complete
performance for various service operations.
Follow the flowchart shown as below to perform resetting.
16