LAUNCH
8. EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
The CReader 6011/7001/7001F/8001/8011/8021/9081 does not perform the leak
test, but signals to vehicle's on-board computer are to initiate the test. Before
using the system test function, refer to the vehicle's service repair manual to
determine the procedures necessary to stop the test.
9. Vehicle Info
This option displays the vehicle information, such as VIN (Vehicle identification
Number), CID (Calibration ID) and CVN (Calibration Verification Number).
5.2 System Diagnosing
This function is specially designed to diagnose electronic control system of single
vehicle model which includes the following systems:
ENG (Engine)
ABS (Anti-lock Brake System)
TCM (Transmission Control Module)
SRS (Supplemental Restraint System)
Notes:
Before diagnosing, please make sure the diagnostic program corresponding to certain
vehicle
model
6011/7001/7001F/8001/8011/8021/9081.
For vehicles manufactured by different manufacturers, it is possible that it has
different diagnostic menus.
Refer to the flowchart illustrated as below to diagnose a vehicle:
CReader 6011/7001/7001F/8001/8011/8021/9081
has
been
15
English User's Manual
installed
on
your
CReader