Insert Tools, Accessories; Technical Data - Hilti TE 6-A36 Original Operating Instructions

2.10 Li‑ion battery charge status
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
en
LED 1
-
NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation.
If the battery charge status LEDs blink, please refer to the information given in section 9, "Troubleshooting".

3. Insert tools, accessories

Hammer drill bits
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Keyed chuck
Wood drill bits
Wood drill bits (auger bits)
Metal drill bits (for steel)
TE‑C CLICK chuck
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery
Battery
Battery
Angular chuck
TE DRS‑6‑A dust removal module

4. Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
20
LEDs blink
-
-
-
-
LED 1
Ø 5...16 mm
C-type connection end
With smooth shank, hexagonal shank
With smooth shank, hexagonal shank
Ø 3...20 mm
Ø Max. 14 mm
Ø 3...10 mm
C 4/36
C 4/36‑ACS
C 4/36-ACS TPS
TE 6‑A36
36 V
4.0 kg
344 mm x 94 mm x 215 mm
1,010/min
940/min
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
B36/2.4 Li‑ion
B36/2.6 Li‑ion
B36/3.0 Li‑ion
B36/3.3 Li‑ion
B36/3.9 Li‑ion
C-type connection end