Safety Instructions - Hilti TE 6-A36 Original Operating Instructions

Power tool
Speed under no load in hammer drilling mode
Single impact energy
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
Noise and vibration information (measured in accordance with EN 60745‑2‑6):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level.
Uncertainty for the given sound level
Triaxial vibration values (vibration vector sum)
Hammer drilling in concrete, a
Drilling in metal, a
h, D
Uncertainty (K) for triaxial vibration value
Other information about the power tool
Chuck
Battery B 36/2.4 Li‑ion
Rated voltage 36 V
2.4 Ah
Capacity
Energy capacity 86.4 Wh
Weight 1.17 kg
Type of cell Li‑ion
Temperature NTC
monitoring
Deep discharge Yes
protection

5. Safety instructions

NOTE
The safety rules in section 5.1 contain all general
safety rules for power tools which, in accordance
with the applicable standards, require to be listed in
the operating instructions. Accordingly, some of the
rules listed may not be relevant to this tool.
TE 6‑A36
1,040/min
2.0 J
99 dB (A)
88 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑6
9 m/s²
h, HD
< 2.5 m/s²
1.5 m/s²
TE‑C Click
B 36/2.6 Li‑ion B 36/3.0 Li‑ion
36 V 36 V
2.6 Ah 3.0 Ah
93.6 Wh 108.0 Wh
1.17 kg 1.17 kg
Li‑ion Li‑ion
NTC NTC
Yes Yes
5.1 General power tool safety warnings
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury. Save all warnings and instructions for future
B 36/3.3 Li‑ion B 36/3.9 Li‑ion
36 V 36 V
3.3 Ah 3.9 Ah
118.8 Wh 140.4 Wh
1.6 kg 1.65 kg
Li‑ion Li‑ion
NTC NTC
Yes Yes
en
21