Insert Tools, Accessories; Technical Data - Hilti TE 4-A22 Operating Instructions Manual

NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation. If the
battery charge status LEDs blink, please refer to the information given in section 9.

3 Insert tools, accessories

en
Designation
Hammer drill bits
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Keyed chuck
Wood drill bits
Wood drill bits (auger bits)
Metal drill bits (for steel)
Designation
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
No-load speed in hammer drill mode
Single impact energy in accordance with EPTA proced-
ure 05/2009
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
18
Description
∅ 5...16 mm
C-type connection end
With smooth shank, hexagonal shank
With smooth shank, hexagonal shank
∅ 3...20 mm
∅ Max. 14 mm
∅ 3...10 mm
Short designation
C 4/36
C 4/36‑ACS
C 4/36-ACS TPS
C 4/36‑90
C 4/36‑350
B 22/3.3 Li‑Ion
B 22/2.6 Li‑Ion
B 22/1.6 Li‑Ion
TE 4‑A22
21.6 V
3.3 kg
324 mm x 94 mm x 201 mm
1,050/min
945/min
1,090/min
2.0 J