Activating/Deactivating The Alarm; Switching Off The Alarm Signal; Snooze Function - Silvercrest SFPW 360 B1 Operating Instructions Manual

Activating/deactivating the alarm

After setting the respective alarm times, these must still
be activated.
♦ Push the On/Off switch
position. The respective alarm symbol ( )
appears on the display and indicates that alarm
1 or 2 is activated.
♦ Push the On/Off switch
position. The respective alarm symbol ( ) goes
out on the display and alarm 1 or 2 is deactivated.
Switching off the alarm signal
The alarm signal will sound at the set time for around
4 minutes and the corresponding alarm symbol (
or ) flashes on the display.
♦ Press any button other than the
to turn off the alarm signal.
You do not have to reactivate the alarm function. The
alarm signal will automatically sound again at the set
time on the next day.

Snooze function

♦ While the alarm is going off, press the
ton to activate the snooze function.
The alarm signal is interrupted for around 5 minutes.
The snooze symbol (
( or ) flash on the display.
SFPW 360 B1
or
or
) and respective alarm symbol
to the "ON"
to the "OFF"
button
GB │ IE │
but-
45 ■